Filter Events by
Join the waiting list
Cricut Orientation
Saturday, April 20, 2024
10:30 AM - 12:00 PM
Come learn how to use the Cricut Maker. In this introduction, you will learn how to use the Cricut Design Space software, and how to cut materials like paper, vinyl and more. The goal is to be certified at the end of this program to use the Cricut independently. No previous experience is required; basic computer skills are needed.
View More
Registration is closed
View More
Get Maker Certified
Saturday, April 20, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Join the waiting list
View More
Get Maker Certified
Friday, April 26, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Registration is open
View More
Inkscape for Cricut Users
Tuesday, April 30, 2024
6:00 PM - 7:45 PM
Rutland
Community Room
Inkscape is a free program you can use at home or on the library computers to make digital ‘vector’ graphics- and you can use it with the library’s Cricut cutter to make your own dazzling physical art pieces. Week 1: Inkscape basics. Week 2: How you can use path tools to get perfect control over what the Cricut draws or cuts out for you. Teens and Adults Welcome!
Join the waiting list
View More
Get Maker Certified
Saturday, May 04, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Registration is open
View More
Inkscape for Cricut Users
Tuesday, May 07, 2024
6:00 PM - 7:45 PM
Rutland
Community Room
Inkscape is a free program you can use at home or on the library computers to make digital ‘vector’ graphics- and you can use it with the library’s Cricut cutter to make your own dazzling physical art pieces. Week 1: Inkscape basics. Week 2: How you can use path tools to get perfect control over what the Cricut draws or cuts out for you. Teens and Adults Welcome!
Registration begins 4/25/2024 at 8:00 AM
MakerSpace Certification - Cricut
Thursday, May 09, 2024
6:00 PM - 7:00 PM
Downtown Kelowna
Makerspace
At the Kelowna MakerSpace, you will find equipment and tools for hands-on projects, digital media creation, and exploring new technologies. We offer in-person certifications for our equipment. Each Thursday features a different station (3D Printing, Circuti Maker, Sublimation Printing, Whisper Room).
View More
Registration is open
View More
Get Maker Certified
Friday, May 10, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Registration begins 4/20/2024 at 8:00 AM
View More
Get Maker Certified
Saturday, May 18, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Registration begins 4/26/2024 at 8:00 AM
View More
Get Maker Certified
Friday, May 24, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Cancelled
View More
Get Maker Certified
Saturday, June 01, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Cancelled
View More
Get Maker Certified
Friday, June 07, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Registration begins 5/18/2024 at 8:00 AM
View More
Get Maker Certified
Saturday, June 15, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Registration begins 5/24/2024 at 8:00 AM
View More
Get Maker Certified
Friday, June 21, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Registration begins 6/1/2024 at 8:00 AM
View More
Get Maker Certified
Saturday, June 29, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Registration begins 6/27/2024 at 8:00 AM
MakerSpace Certification - Cricut Machine
Thursday, July 11, 2024
6:00 PM - 7:00 PM
Downtown Kelowna
Makerspace
At the Kelowna MakerSpace, you will find equipment and tools for hands-on projects, digital media creation, and exploring new technologies. We offer in-person certifications for our equipment. Each Thursday features a different station (3D Printing, Circuti Maker, Sublimation Printing, Whisper Room).
View More