Oops!
Start Date is not before End Date

Filter Events by

  • Event Types  
  • Age Groups  
  • Locations  

Registration is closed

Get Maker Certified

11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.

Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.

Note that in Vernon, currently only two pieces of equipment require certification before use:
  • 3D Printer
  • Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.

Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.

Please review our Makerspace guidelines at the following link for more details about our policies:
View More
Registration is open — Register at the library

Get Maker Certified

6:00 PM - 7:45 PM
Rutland
Makerspace
This is a 1 hour and 45 minute period you can get certified to use the Makerspace equipment.

If you are interested in getting certified or using the Makerspace equipment in Rutland at this time, please contact staff to set up an appointment! You will need to bring government issued ID to complete the certification process. Makerspace users under the age of 19 will need to bring their Parent/Guardian to co-sign the waiver and agreement.

Contact us to get started:
In person at the rutland library
rutland@orl.bc.ca
(250) 765-8165
View More
Registration is open

Get Maker Certified

11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.

Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.

Note that in Vernon, currently only two pieces of equipment require certification before use:
  • 3D Printer
  • Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.

Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.

Please review our Makerspace guidelines at the following link for more details about our policies:
View More
Registration is open — Register at the library

Get Maker Certified

10:00 AM - 11:30 PM
Rutland
Makerspace
This is a 1 hour and 45 minute period you can get certified to use the Makerspace equipment.

If you are interested in getting certified or using the Makerspace equipment in Rutland at this time, please contact staff to set up an appointment! You will need to bring government issued ID to complete the certification process. Makerspace users under the age of 19 will need to bring their Parent/Guardian to co-sign the waiver and agreement.

Contact us to get started:
In person at the rutland library
rutland@orl.bc.ca
(250) 765-8165
View More
Registration is open — Register at the library

Get Maker Certified

6:00 PM - 7:45 PM
Rutland
Makerspace
This is a 1 hour and 45 minute period you can get certified to use the Makerspace equipment.

If you are interested in getting certified or using the Makerspace equipment in Rutland at this time, please contact staff to set up an appointment! You will need to bring government issued ID to complete the certification process. Makerspace users under the age of 19 will need to bring their Parent/Guardian to co-sign the waiver and agreement.

Contact us to get started:
In person at the rutland library
rutland@orl.bc.ca
(250) 765-8165
View More
Cancelled

Get Maker Certified

11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.

Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.

Note that in Vernon, currently only two pieces of equipment require certification before use:
  • 3D Printer
  • Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.

Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.

Please review our Makerspace guidelines at the following link for more details about our policies:
View More
Registration is open — Register at the library

Get Maker Certified

6:00 PM - 7:45 PM
Rutland
Makerspace
This is a 1 hour and 45 minute period you can get certified to use the Makerspace equipment.

If you are interested in getting certified or using the Makerspace equipment in Rutland at this time, please contact staff to set up an appointment! You will need to bring government issued ID to complete the certification process. Makerspace users under the age of 19 will need to bring their Parent/Guardian to co-sign the waiver and agreement.

Contact us to get started:
In person at the rutland library
rutland@orl.bc.ca
(250) 765-8165
View More
Cancelled

Get Maker Certified

11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.

Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.

Note that in Vernon, currently only two pieces of equipment require certification before use:
  • 3D Printer
  • Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.

Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.

Please review our Makerspace guidelines at the following link for more details about our policies:
View More
Registration begins 5/21/2024 at 8:00 AM — Register at the library

Get Maker Certified

6:00 PM - 7:45 PM
Rutland
Makerspace
This is a 1 hour and 45 minute period you can get certified to use the Makerspace equipment.

If you are interested in getting certified or using the Makerspace equipment in Rutland at this time, please contact staff to set up an appointment! You will need to bring government issued ID to complete the certification process. Makerspace users under the age of 19 will need to bring their Parent/Guardian to co-sign the waiver and agreement.

Contact us to get started:
In person at the rutland library
rutland@orl.bc.ca
(250) 765-8165
View More
Registration begins 5/18/2024 at 8:00 AM

Get Maker Certified

11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.

Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.

Note that in Vernon, currently only two pieces of equipment require certification before use:
  • 3D Printer
  • Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.

Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.

Please review our Makerspace guidelines at the following link for more details about our policies:
View More
Registration begins 5/28/2024 at 8:00 AM — Register at the library

Get Maker Certified

6:00 PM - 7:45 PM
Rutland
Makerspace
This is a 1 hour and 45 minute period you can get certified to use the Makerspace equipment.

If you are interested in getting certified or using the Makerspace equipment in Rutland at this time, please contact staff to set up an appointment! You will need to bring government issued ID to complete the certification process. Makerspace users under the age of 19 will need to bring their Parent/Guardian to co-sign the waiver and agreement.

Contact us to get started:
In person at the rutland library
rutland@orl.bc.ca
(250) 765-8165
View More
Registration begins 5/24/2024 at 8:00 AM

Get Maker Certified

11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.

Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.

Note that in Vernon, currently only two pieces of equipment require certification before use:
  • 3D Printer
  • Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.

Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.

Please review our Makerspace guidelines at the following link for more details about our policies:
View More
Registration begins 6/4/2024 at 8:00 AM — Register at the library

Get Maker Certified

6:00 PM - 7:45 PM
Rutland
Makerspace
This is a 1 hour and 45 minute period you can get certified to use the Makerspace equipment.

If you are interested in getting certified or using the Makerspace equipment in Rutland at this time, please contact staff to set up an appointment! You will need to bring government issued ID to complete the certification process. Makerspace users under the age of 19 will need to bring their Parent/Guardian to co-sign the waiver and agreement.

Contact us to get started:
In person at the rutland library
rutland@orl.bc.ca
(250) 765-8165
View More
Registration begins 6/1/2024 at 8:00 AM

Get Maker Certified

11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.

Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.

Note that in Vernon, currently only two pieces of equipment require certification before use:
  • 3D Printer
  • Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.

Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.

Please review our Makerspace guidelines at the following link for more details about our policies:
View More
Registration begins 6/27/2024 at 8:00 AM

MakerSpace Certification - Cricut Machine

6:00 PM - 7:00 PM
Cricut Maker Station
Downtown Kelowna
Makerspace
At the Kelowna MakerSpace, you will find equipment and tools for hands-on projects, digital media creation, and exploring new technologies. We offer in-person certifications for our equipment. Each Thursday features a different station (3D Printing, Circuti Maker, Sublimation Printing, Whisper Room).
View More
Registration begins 7/4/2024 at 8:00 AM

MakerSpace Certification - Sublimation Printing

6:00 PM - 7:00 PM
Mug printed with a photograph
Downtown Kelowna
Makerspace
At the Kelowna MakerSpace, you will find equipment and tools for hands-on projects, digital media creation, and exploring new technologies. We offer in-person certifications for our equipment. Each Thursday features a different station (3D Printing, Circuti Maker, Sublimation Printing, Whisper Room).
View More
Registration begins 7/11/2024 at 8:00 AM

MakerSpace Certification - Whisper Room

6:00 PM - 7:00 PM
Recording Studio 97
Downtown Kelowna
Makerspace
At the Kelowna MakerSpace, you will find equipment and tools for hands-on projects, digital media creation, and exploring new technologies. We offer in-person certifications for our equipment. Each Thursday features a different station (3D Printing, Circuti Maker, Sublimation Printing, Whisper Room).
View More
Registration begins 7/18/2024 at 8:00 AM

MakerSpace Certification - 3D Printing

6:00 PM - 7:00 PM
3D Printer Station
Downtown Kelowna
Makerspace
At the Kelowna MakerSpace, you will find equipment and tools for hands-on projects, digital media creation, and exploring new technologies. We offer in-person certifications for our equipment. Each Thursday features a different station (3D Printing, Circuti Maker, Sublimation Printing, Whisper Room).
View More
Registration begins 7/25/2024 at 8:00 AM

MakerSpace Certification - Cricut Maker

6:00 PM - 7:00 PM
Cricut Maker Station
Downtown Kelowna
Makerspace
At the Kelowna MakerSpace, you will find equipment and tools for hands-on projects, digital media creation, and exploring new technologies. We offer in-person certifications for our equipment. Each Thursday features a different station (3D Printing, Circuti Maker, Sublimation Printing, Whisper Room).
View More
Registration begins 8/1/2024 at 8:00 AM

MakerSpace Certification - Sublimation Printing

6:00 PM - 7:00 PM
"You Art Here" printed on a tote bag.
Downtown Kelowna
Makerspace
At the Kelowna MakerSpace, you will find equipment and tools for hands-on projects, digital media creation, and exploring new technologies. We offer in-person certifications for our equipment. Each Thursday features a different station (3D Printing, Circuti Maker, Sublimation Printing, Whisper Room).
View More