Filter Events by
Join the waiting list
View More
Get Maker Certified
Friday, April 26, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Join the waiting list
View More
Get Maker Certified
Saturday, May 04, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Registration is open
View More
Get Maker Certified
Friday, May 10, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Registration is open
View More
Get Maker Certified
Saturday, May 18, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Registration begins 4/26/2024 at 8:00 AM
View More
Get Maker Certified
Friday, May 24, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Cancelled
View More
Get Maker Certified
Saturday, June 01, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Cancelled
View More
Get Maker Certified
Friday, June 07, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Registration begins 5/18/2024 at 8:00 AM
View More
Get Maker Certified
Saturday, June 15, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Registration begins 5/24/2024 at 8:00 AM
View More
Get Maker Certified
Friday, June 21, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies:
Registration begins 6/1/2024 at 8:00 AM
View More
Get Maker Certified
Saturday, June 29, 2024
11:00 AM - 12:30 PM
Vernon
Makerspace
This 90 minute one-on-one appointment with our technical staff will help get you started using the equipment in our Makerspace.
Materials for training will be supplied where relevant (subject to availability,) although some equipment requires removable storage devices like a USB stick, portable hard drive, etc, to save your work.
Note that in Vernon, currently only two pieces of equipment require certification before use:
- 3D Printer
- Cricut Maker
The rest of the makerspace equipment (including the soundbooth,) can be used without certification, after a brief orientation the first time you use them, although you *can* book this time to get extra help using any of our equipment.
Please note that if you're looking for help with the soundbooth, you need to make an additional reservation alongside this one- please see https://orl.evanced.info/spaces/Patron/Results to reserve the soundbooth for the same time.
Please review our Makerspace guidelines at the following link for more details about our policies: